Rolling Steel Solid Doors
1
Model CG300 commercial quality
2
Model CG600 economy quality
3
Model Insulator R Value 8.7
4
Model CGDADE Miami Dade county approved
5
Model CG650 mini roll up doors
Commercial Coiling Grilles
6
Model MM10 architectural Coiling Grille
7
Model CG516 coiling grille retail quality
8
Model Perf Door ventilated doors
9
Model Eurogrille for beauty and strength
10
Model CGCS150 counter shutters
UL Classified Fire Rated Products
11
Model CGFD300 UL Classified coiling doors
12
Model CGFS150 fire rated counter shutters
13
Model CGFD300EZ with automatic EZ reset feature
14
Insulated & Fire Rated Coiling Doors
Door for Special Application
15
Side Folding Grilles
16
Folding Gates
17
European Shutters
18
Doc-Port Rolling Door for high stress wind loads
Motors
19
Motorize your Rolling Gates & Shutters.
20
Motor operators are integral power units engineered for long life and reliability.
21 Overhead Doors
22 Arm Barriers and Access Controls
23 Sliding Gates
   
 
Search:
Side Folding Grilles
 

 

Specifications

  • General – Furnish sliding grille by CITY-GATES USA preparation of opening. Structural support for track, pockets, and miscellaneous finish work are excluded.
  • Curtain“Guardian” design shall have extruded aluminum hinge panels top and bottom with eyeleted horizontal aluminum links spaced 12” apart by tubular aluminum spacers at each hanger rod. Continuous vertical aluminum 5/16” diameter rods shall be at 1-3/8” on center with clear space between rods of 1-1/16”. Curtain shall hang from top track by nylon ball bearing roller assembly at each hanger rod.
    Optional Designs –
    1. “Econo Guard” design shall have continuous vertical aluminum 5/16” diameter rods 2-3/4” on center with clear space between rods of 2-7/16”.
    2. “Panel Guard” design shall have staggered 2-3/4 wide x9” (Model 99), 6” (Model 66), or 3” (Model 33) high extruded aluminum panels in lieu of horizontal aluminum links.
  • Vertical Posts – Curtain shall be attached to 2-3/4” x 1-7/6” aluminum extrusions consisting of a leading edge closing to wall strike and a trailing edge acting as the pocket closure. Intermediate mullions shall be provided when curtain exceeds 10’0”. Each post shall bee equipped with nylon ball bearing roller assembly at top.
  • Locking – Leading adge shall be provided with cylinder operated lock operable inside and outside. All intermediate mullions shall be provided with concealed cylinder operated drop bolts operable from inside. Dust proof floor receptacler shall be provided for drop bolds.
  • Track – Overhead track shall be extruded aluminum 1-3/4” wide x 1-1/2” high with grooves for alignment pins where track is spliced. Curved track, when required shall have 12” redius with 90”, 60”, 25” and 30” curves available.
  • Finish – Curtain shall be mill finish. Vartical posts, hinge panels, and optional panel design shall be clear anodized. Track and wall strike shall be clear anodized or bronze acrylic enamel.
 
DISTRUBUTED BY
 
WE SERVICE NEW YORK
NEW JERSEY NASSAU SUFFOLK
Monutocturer –erect – Services
SECURITY STEEL ROLLING DOORS & GRILLES`
 
212-233-9700
Fax 718-353-0724

www.citygatesusa.com
15-20 129th Street
College Point, NY 11356