In Order to retain the factory-like finish of new or refinished fixtures:

• Do NOT use an abrasive cleaner which will scratch the surface. Clean after each use with a mild liquid cleaner such as Scrubbing Bubbles made by Dow.

• Do NOT drop sharp or heavy object on the finish, which may cause it to chip. Contact your refinisher immediately for repairs if this should occur

• All leaky faucets must be repaired to protect the finish against the eroding action of dripping water, which may cause to finish the crack and wear out prematurely.

• Destruction of the finish may occur through improper use of acid bearing compounds (drain openers, tile grout cleaners). All chemicals must be kept away for the finish (cosmetics, hair dyes, perfumes) which may stain or mar the finish.

• Do NOT use a suction cup bath mat. Most mats will produce a reaction with the finish when subjected to hot water. Contact your refinisher for a non-rubber SLIP-PROOF BATH MAT (if available).

Remember, if you treat your new surface with respect, clean it regularly, and follow items 1-8, your fixture will stay shiny and bright and give you many years of trouble free service.